Home page

How to clean glass properly

2025-02-24

　　1. Wiping Glass: First, use a towel to clean the glass frame, then use a glass scraper dipped in diluted glass cleaning solution to evenly apply it from top to bottom on the glass. Repeat the above process, scraping the glass clean from top to bottom with the glass scraper, and use a dry towel to wipe off any water marks left on the frame. The water marks on the glass must be scraped clean with the glass scraper; otherwise, streaks will remain on the glass.
　　2. Mix vinegar and water in a 1:2 ratio, put it in a spray bottle, spray it on the glass, and then wipe it to achieve a very clean result.
　　3. Add 5% ammonia solution or gasoline to a basin of water to clean the glass. Once the glass is slightly dry, wipe it clean with a dry cloth, and the glass will be spotless, bright, and transparent. When wiping the glass, you can choose different models of window scrapers, depending on whether you are cleaning double-glazed or single-glazed glass. Using a window scraper is convenient, labor-saving, and safe.
　　4. If there is mold on the glass surface, you can mix hydrofluoric acid (HF) with water in a 1:8 ratio (Note: exceeding 1:8 can cause damage to the hands) and wipe the glass. Note: Be sure to take corrosion protection measures; skin must not come into contact with HF, or it will cause severe corrosion. After wiping the glass, wipe it again with clean water, and finally dry the glass.

Precautions for Glass in Daily Maintenance

Glass is not completely solid.